Azel DS-60P Digital Temperature Gauge Remote Hydronic Radiant Solar GeoThermal

Description

DIGIT-STAT DS-60 DIGITAL TEMPERATURE GAUGE FOR HYDRONIC HEATING/SOLAR HEATING/GEOTHERMAL SYSTEM
The microprocessor-based, AZEL Technologies Digital Temperature gauge DS-60 represents the “next generation” in temperature gauge industries. The bold, hi-contrast LCD display ensures accurate temperature reading to the tenth degree and can be easily read from greater distances than the typical mechanical temperature gauge.
DS-60
REPLACES
TWO
mechanical temperature gauges as it can centralize the readings in one spot and simultaneously display the accurate temperatures of supply and return piping on a hydronic heating system. In addition, the solid state temperature sensor probe can be extended up to several hundred feets. The unit is designed to be powered by 24VAC input or by lithium battery. When 24VAC is supplied, the lithium battery enable the unit to work in case of power failure. Its features also include Min/Max memory which shows the highest and lowest temperature after the last reset and instant Fahrenheit to Centigrade conversion. DS-60 is also ideal for any application (EG. Solar heating or Geothermal) that requires quick and accurate response to temperature change, an easy to read display and a wide temperature range.
FEATURES:
Dual Large LCD (Liquid Crystal Display) to show supply and return temperature
Min/Max memory can be selected for both OUT(Supply) and IN (Return) water temperature since the last time RESET button was pressed.
Celsius or Fahrenheit switch on the front unit.
Dual Power input: 24VAC or Lithium Battery (24VAC input has priority over Lithium Battery input if both power inputs are applied)
Easy installation
Frequent sample rate dictate any change in temperature instantly
Supplied with two sensor probes
SPECIFICATIONS:
Display: Dual LCD (Liquid Crystal Display)
Temperature range: -58F to 302F (-50C to 150C)
Resolution: 0.1F(0.1C).
Accuracy: ±1C / ±2F
Sample rate: 3 Secs.
Input: 2 x 10K ohm thermistor probe model: P-03 (designed for strap on a pipe or insert into a temperature well)
Operating Voltage: 24VAC or Lithium Battery (included, last for over 3 years)
Size: 3.5” x 2.0” x 0.9” (88.9mm x 50.8mm x 22.86mm)
Enclosure: Flame-retardant plastic
Operating Temperature: 32 to 122F(0 to 50C)
Weight: 0.11lbs (50g)