HTS-2000 Aluminum Brazing Rods Repair~ Easy Complete Kit~ (1 LB) KIT

Description

40 - 18" HTS-2000 Aluminum Repair Brazing Rods
Brazing / Soldering / Low Temperature / No Welding
Includes: (1 LB) 40- 18" Brazing Rods~ In Sealed Proof Container Tube to Protect Rods, 1
Brushes,
Printed Instructions, DEMO
DVD
Requires No Flux. Metal-to-Metal Bond.
Stronger than the Base Metal - up to 45,900 PSI.
Use Any Heat Source, such as propane, butane, mapp, or an oxy-acetylene torch.
Low Temperature. Between 717 and 737 Degrees Working Temperature.
Over 500 Degrees Below Melt Point of Aluminum.
Brazes all Aluminum Alloys, including zinc, magnesium, pot metal, and cast.
Stores Indefinitely.
"
Second Generation
" fluxless low-heat brazing rod for nonferrous metals.
Joins all aluminum alloys, including those that are not easily joined by high-temperature brazing.
Performs well on aluminum, cast aluminum, pot metal, copper, and magnesium. Easily repair corroded or oil-impregnated metals that can be next to impossible to fix using welding machines or other brazing products
Repair aluminum parts stronger than new in minutes - No expensive welding machine needed!
Repair cracks in aluminum engine blocks and heads.
Repair holes in bell housings, oil pans, and radiators.
Repair leaks in aluminum boats, tanks, condensers, and A/C lines.
Repair threads in transmission housings, alternators, generators, and spark plug ports.
Recast a section or refabricate ears and tabs.
Use for repairs to automotive, truck, tractor, aviation, motorcycle, boats, awnings, gutters, ladders, rivets, brackets, or for complete fabrication.
HTS -2000 repairs are stronger than the aluminum base metal - not just a seal. Not to be confused with Alumaloy, Alumaweld, Alumarod, Durafix, Aladdin 3 in 1, or any other first generation rods, most consisting of 3 alloys. HTS-2000 is a unique product made of "nine alloys"
that cost more to produce this "superior advanced technology." HTS-2000 has an elongation of 10% in 2 inches (rather than the standard 3% like the first generation rods listed above) which makes HTS-2000 3 times more flexible, and stronger than any of its competitors. It also easily penetrates past impurities that lay below the metal's surface which may be impossible to penetrate with competitors materials. No flux is necessary with this product
.
For cast iron and steel repairs, we also offer HTS-528 rods for sale with HTS-2000 Aluminum Brazing Rods. Be aware that to use HTS-528 rods, you will need a dual-gas torch to generate more heat (propane/MAPP alone will not be sufficient), and you should wear brazing goggles with a minimum lens shade number of 3 or 4. Unlike HTS-2000, the HTS-528 rods are designed for tight fitting repairs of 0.003" clearance or less.
We will combine shipping based on weight.
We Accept Paypal: Paypal Accepts MasterCard, Visa, American Express, Discover, and Electronic Check.
Thank you!