LED LIGHT BULB UPGRADE Flashlight COB Lamp 3.0V for C D AA 2-Cell (16-220) Lumen

Description

LED Flashlight PL Lamp Bulbs 3.0V for Standard 2-C,  2-D, 2-AA Cell Flashlights
Use these (0.2W), (0.5W), (1.0W), or (5.0W) LEDs to upgrade standard 2-cell flashlights to superior brightness, efficiency, and longevity.
NOTE:  The Smallest LEDs of
(0.2W), (0.5W) LEDs are
Equivalent
in brightness or a little more than a PR2
Incandescent
bulb.
These LED's will be 24 Lumens, 35 Lumens, 100, and 220 lumens bright on fresh standard or alkaline batteries and (will not light below 2.4 Volts)
·
The Better LED of this add is the Cree 5-Watt - LED Upgrade to 220-320 Lumen BULB for Flashlight 2-Cells (3.0V-3.3V) for C D AA
https://www.ebay.com/itm/232616861887
6
STOP!
-
We also have Much Brighter GREAT Bulbs True Upgrade LE
D
s:
Why not try one of these for your better flashlight?
For regular 3V or
rechargeable batteries
with 2.4V
NiCad or Ni-Mh
2-cell lights !
We recommend these Best regulated LEDs to get the most light out of your batteries to be
bright on low voltage batteries with high
brightness from 2 – 9V when batteries are new or half discharged!
·
5.0W CREE at 230+ lumens - LED Upgrade PR Bulb for LUMILITE Flashlights Z-2D Z-2C Z-2AA 1-9V
https://www.ebay.com/itm/233091305276
·
3W Epistar at 200+ Lumens - LED Upgrade Bulb for MAG-LITE® 1 to 6 Cell Flashlights 0.4A, 1- 9 Volt
https://www.ebay.com/itm/232341382951
·
0.5W – at 50 Lumens - LED Upgrade PR Bulb w-boost dc/dc (1-6) Cell Flashlight 1-9V Headlight
https://www.ebay.com/itm/332227325881
We have both LEDs and incandescent or halogen bulbs for special applications like Headlights, Bike lights,
Radios, and the brighter LEDs that can compare with halogen bulbs.
Also, we have LEDs that are Universal Polarity work either (+ or -) on bottom contact and test LEDs that allow determination the voltage polarity in bulb sockets.
If you're not sure, let us try to help select the best
LED
for your needs!
--- Super Bright Led's for Less ---
Simply replace your existing bulb with this LED – no modifications necessary!
Works with standard 2 cell flashlights
Minimizes battery and bulb replacement waste
Focusability of flashlight is preserved with these point source LEDs
Brighter Light for improved vision for
enhanced visibility of fine detail
Longer battery life from high efficiency LED
Long lamp life 50,000 hours of continuous use
Dependable and shock resistant
Easy To Install
Features:
INTENSE BRIGHT LIGHT
output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.
FOCUSABILITY
These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.
LONGER BATTERY LIFE
results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.
INDESTRUCTIBLE LED
performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.
EASY TO INSTALL
as if just replaces your existing bulbs - no modifications necessary
See the difference!
* Select the perfect bulb by wattage balancing (Brightness vs. Longer Battery life run time).
Standard PR2 Incandescent vs. LED 0.2 Watt                             LED  1.0,   0.5, and 0.2 Watt
1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.
2) Warning! - For safety always follow manufactures safety and operational instructions.
3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb.
Description:
Upgrade / Replacement for standard flashlight Lamp used in many applications that take a flange base light bulb
2-cell battery operated products (Energizer Zink, Energizer Alkaline*,  PowerGenix NiZi* ,and Energizer AA lithium*.
*For best lighting performance the
use of better batteries is recommended because they maintain higher working voltages / currents.
NiCad, NiMH batteries are lower votages and are not as bright unless they are fully charged.
☛
·
Buy two now and save with discounted shipping,
the right bulb is hard to find, why not get two
☛
·
Buy 10 and get 1 extra bulb free
Also you maybe interested in AA Battery D CELL Adapter Holder 1.5V Cell Converts 1, 2, 3 AA to 1 D Size
https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=331078037178&ssPageName=STRK:MESE:IT#ht_685wt_1124
This is a very popular style of bulb for Many Viewers, flash lights, and devices that run on two batteries (not 3 cells)
The LED lamps are 0.2W, 0.5W, and 1.0W is the best. The difference is in the brightness and cost.
If you want long run time choose the .2W or .5W. Personally, I would recommend the 1.0W so when you want light you have a bright light.
Also, I have a special on buying one of each for .90 so you can have both ways.
From the Drop down select the size 0.2, 0.5, 1.0, or 5.0 Watt      OR  Get a set with one of each size.
Specifications for
LED Bulbs vs. Standard Bulb
*Choose the perfect bulb for "your use"
Lamp Part Number
WP13.5S-
0.2W
P13.5S-
0.5W
P13.5S-
1.0W
Incandescent PR-2 (Reference Only)
Brightness
Bright
(2X)
Brighter
(4X)
Brightest
(8X)
White to Amber
(1X)
Lamp Battery Run Time vs. PR2
Longest
(12X)
Medium (5X)
Extended
(3X)
Short
(1X)
Base Type
P13.5S
P13.5S
P13.5S
P13.5S
Voltage
3.0V
3.0V
3.0V
2.4V
Voltage Range
2.7-3.2V
2.7-3.2V
2.7-3.5V
2.5-3V
Current (TYP 3.0V)
40mA
100mA
270mA
500mA
Luminous Flux (3V)
24 L
35 L
80 L
10 L
Max Watts
0.2
0.5
1.0
1.3
Light Color
White
White
White
White
Lamp Life Hours
50,000
50,000
50,000
15
Max. Overall Length
0.90"
0.91"
0.97"
1.20"
Max. Lamp Dia.
0.53"
0.53"
0.53"
0.53"
Primary Application
Flashlight, Lamp,
lantern
Flashlight, Lamp, lantern
Flashlight, Lamp,
lantern
Flashlight, Lamp, lantern
* Select the perfect bulb for "your use" balancing wattage (Brightness vs. Longer Battery life).
All Standard Polarity with bottom contact (+) Flange (-)
*Specifications are accurate for this Miniature LED Bulb.
Applications for this standard Flange type bulb are too numerous to list so purchaser is responsible for compatibility with their actual product.
1 LED Flashlight Lamp, For 2 "AA" Or "C" Or "D" Size Batteries
The Lamp has a STANDARD 'PR' Base - P13.5s is International standard flanged base
, 9.2mm Diameter, with flange "V" notch
★
FEEDBACK:
Please return a positive review for good service,
We automatically leave positive feedback for all customers.
Thank You.
If for any reason you are not satisfied with your purchase, CONTACT US FIRST. Please do not leave negative feedback or open a case without contacting us to give us a opportunity to RESOLVE any issue.
We are very accommodating and will be more than happy to fix any problem. We want your repeat business!
© 2014-2021 Draco Products. All Rights Reserved